dc.contributor.author | Cao, Vinh Duy | |
dc.contributor.author | Pilehvar, Shima | |
dc.contributor.author | Salas Bringas, Carlos | |
dc.contributor.author | Szczotok, Anna | |
dc.contributor.author | Rodriguez, Juan F. | |
dc.contributor.author | Carmona, Manuel | |
dc.contributor.author | Al-Manasir, Nodar | |
dc.contributor.author | Kjøniksen, Anna-Lena | |
dc.date.accessioned | 2018-01-09T07:51:25Z | |
dc.date.available | 2018-01-09T07:51:25Z | |
dc.date.created | 2017-01-05T11:48:44Z | |
dc.date.issued | 2017 | |
dc.identifier.citation | Energy Conversion and Management. 2017, 133 56-66. | nb_NO |
dc.identifier.issn | 0196-8904 | |
dc.identifier.uri | http://hdl.handle.net/11250/2476319 | |
dc.description.abstract | Concretes with a high thermal energy storage capacity were fabricated by mixing microencapsulated
phase change materials (MPCM) into Portland cement concrete (PCC) and geopolymer concrete (GPC).
The effect of MPCM on thermal performance and compressive strength of PCC and GPC were investigated. It was found that the replacement of sand by MPCM resulted in lower thermal conductivity and higher thermal energy storage, while the specific heat capacity of concrete remained practically stable when the phase change material (PCM) was in the liquid or solid phase. Furthermore, the thermal conductivity of GPC as function of MPCM concentration was reduced at a higher rate than that of PCC. The power consumption needed to stabilize a simulated indoor temperature of 23°C was reduced after the addition of MPCM. GPC exhibited better energy saving properties than PCC at the same conditions.
A significant loss in compressive strength was observed due to the addition of MPCM to concrete.
However, the compressive strength still satisfies the mechanical European regulation (EN 206-1, compressive strength class C20/25) for concrete applications. Finally, MPCM-concrete provided a good thermal stability after subjecting the samples to 100 thermal cycles at high heating/cooling rates. | nb_NO |
dc.language.iso | eng | nb_NO |
dc.publisher | Elsevier | nb_NO |
dc.subject | Microencapsulated phase change materials | nb_NO |
dc.subject | Portland cement concrete | nb_NO |
dc.subject | Geopolymer concrete | nb_NO |
dc.subject | Specific heat capacity | nb_NO |
dc.subject | Latent heat | nb_NO |
dc.subject | Thermal conductivity | nb_NO |
dc.title | Microencapsulated phase change materials for enhancing the thermal performance of Portland cement concrete and geopolymer concrete for passive building applications | nb_NO |
dc.type | Journal article | nb_NO |
dc.type | Peer reviewed | nb_NO |
dc.description.version | publishedVersion | nb_NO |
dc.source.pagenumber | 56-66 | nb_NO |
dc.source.volume | 133 | nb_NO |
dc.source.journal | Energy Conversion and Management | nb_NO |
dc.identifier.doi | 10.1016/j.enconman.2016.11.061 | |
dc.identifier.cristin | 1421519 | |
dc.relation.project | Norges forskningsråd: 238198 | nb_NO |
cristin.unitcode | 224,50,0,0 | |
cristin.unitname | Avdeling for ingeniørfag | |
cristin.ispublished | true | |
cristin.fulltext | original | |
cristin.qualitycode | 2 | |